xTIMEComposer command line - Installing a new hardware

Technical questions regarding the xTIMEcomposer, xSOFTip Explorer and Programming with XMOS.
KurtOz
Junior Member
Posts: 5
Joined: Tue Jul 04, 2017 7:56 pm

xTIMEComposer command line - Installing a new hardware

Postby KurtOz » Wed Aug 23, 2017 10:25 pm

Hi,
Can we install a new hardware from a user .xn file from the command line, instead of xTIMEComposer "Help>Install New Hardware" utility?

Thanks.
User avatar
andrewxcav
Active Member
Posts: 37
Joined: Wed Feb 17, 2016 5:10 pm
Contact:

Postby andrewxcav » Thu Aug 24, 2017 2:45 pm

If your .xn file is in the project directory, you should just be able to specify it in your Makefile and then run xmake.

Add a line in your Makefile like this:

TARGET = my_hardware

If your xn file is called my_hardware.xn
KurtOz
Junior Member
Posts: 5
Joined: Tue Jul 04, 2017 7:56 pm

Postby KurtOz » Thu Oct 05, 2017 7:24 pm

Thank you for your reply. Probably the initial error I have seen was about dangling project directory links. It works now.

Return to “Development Tools and Programming”